Clouds, the granular synthesis module from Mutable Instruments, was discontinued in 2017. Supercell brings back Clouds in a more accessible 34 hp form factor, offering an improved user interface – especially when running its “SUPERPARASITES” alternative firmware. It also offers several additional features not found in the original module:
- Each of the Blend parameters (Feedback, Panning, Mix, and Space) have dedicated knobs with their own CV inputs and inverting attenuators (attenuverters).
- The inputs and outputs now have mute switches, stereo VCAs, and separate VU meters. The knobs act as offset controls when their respective VCA inputs are patched.
- A stereo output gain control has been added, providing an additional +6 dB of gain to compensate for low output levels when using certain parameter combinations.
- The complex process of changing the sampling time and managing presets has been simplified with dedicated switches and status LEDs.
- Extensive modulation options for all parameters including direct patching of external CV, distribution of one CV to all parameters via the AUX input, or an internal smooth random CV that is normalized to any unpatched inputs when AUX is also unpatched. The attenuverters control the modulation depth in all three cases. As of firmware v1.01 the internal modulation rate can be adjusted within a range of 1 to 100 Hz.
- The inputs and outputs now include stereo VCAs and separate VU meters. The knobs act as offset controls when their respective VCA inputs are patched.
- Pitch is now controlled by two separate inputs: the V/Oct input is exponential and the Pitch input is linear. When both inputs are used, their voltages are summed.
- A manual Trig switch (for capturing individual grains) has been added, in addition to the Trig input that was present on Clouds.
All other features of the original Clouds remain intact, including access to the alternate modes. Thanks to Emilie Gillet for making the original Clouds hardware and firmware available under open-source licenses.
SUPERPARASITES ALTERNATIVE FIRMWARE
The “Superparasites” alternate firmware is also available for the Supercell, which combines the code from Parasites (Matthias Puech) with Beat Repeat (Julius Kammerl) into one powerful expanded firmware with eight DSP modes available. These modes are easily available via front panel controls, and make switching functionality a whole lot easier. See the Grayscale Downloads section for details or Github for source code.
See the handy Superparasites PDF MANUAL/CHEATSHEET for an easy-to-follow guide to using Supercell when in its SUPERPARASITES guise. (kindly put together by “Jones” on the Muff WIggler forum)
Max Depth: 25mm
Power: 180mA @ +12V / 60mA @ -12V