Lattice & uCLS (micro Expander) BUNDLE

£318.00 (£265.00 ex VAT)

12-step sequencer composed of a 4×3 grid of steps that can be navigated horizontally, vertically or sequentially from step 1 to step 12. BUNDLE includes the uCLS (micro Lattice Expander), adding alternative modes, gate output, CV step selection & attenuation.

 

Out of stock

Join the waitlist to be emailed when this product becomes available

SKU: lattice-ucls-micro-expander-bundle Categories: ,

Description

THIS SPECIAL BUNDLE COMPRISES THE MAIN LATTICE SEQUENCER MODULE & THE uCLS (MICRO LATTICE EXPANDER)

Tenderfoot Electronics Lattice is a 16HP 12-step sequencer composed of a 4×3 grid of steps that can be navigated horizontally, vertically or sequentially from step 1 to step 12.

Sending a trigger into one of the 3 progression inputs will move the sequencer forward a single step. This will result in a 3-step, 4-step or 12-step sequence depending on the input used.

The Lattice starts to become much more interesting when a combination of the 3 progression inputs are used, opening the doors to much more complex melodic sequences.

  • NEXT moves the sequencer to the next step in numerical order. ie. 1-2-3-4-5-6-7-8-9-10-11-12 and back around to step 1 again.
  • DOWN moves the sequencer down one position to the step immediately below the current step. ie. 1- 4-7-10 and back to 1.
  • RIGHT moves the sequencer one step to the right, and will loop back to the start of the row ie. 1 – 2 – 3 and back to 1 again.
  • RESET will always move the sequencer back to step 1.
  • OUT is the output of the module, where the control voltage generated by the sequencer is sent to. This is where you attach the module you wish to modulate (for example, the 1V/oct input of a VCO can be patched directly to the output of the Lattice here).

µCls (INCLUDED IN THIS BUNDLE):

µCls adds the same functions to the Tenderfoot Electronics Lattice sequencer as Cells – minus the keypad – and with the addition of an attenuator dial for the envelope/CV input, all nicely packaged in a 4HP module! :

  • Forward / Reverse mode controlled by a CV trigger and physical button.
  • Random step selection by CV trigger.
  • CV selection of the current step – great for inputting a positive envelope or LFO to cycle through the steps on the Lattice.
  • Gate output  – Whenever a new step is navigated to, a pulse will be output by Cells in order to trigger a voice’s envelope. Pressing on the keypad can also output a constant gate signal.
  • Attenuator to fine tune the effect of the envelope / cv input (with LED indicator).

FOR FURTHER INFORMATION CHECK THE MANUAL HERE

Lattice:

Width: 16hp
Depth: 21mm
Power: 33mA @ +12V / 4mA @ -12V

µCls:

Width: 4hp
Depth: 32mm
Power: 26mA @ +12V / 0mA @ -12V