Integra Solum [preorder]

£199.00 (£165.83 ex VAT)

Dual multi-mode clock divider/trigger generator

IN STOCK NOW!!
SHIPPING ON 15TH DECEMBER (release date)

In stock

SKU: integra-solum Categories: , , , ,

Description

IN STOCK NOW!!         SHIPPING ON 15th DECEMBER (release date)

Integra Solum is a dual rotating clock divider with 16 trigger outs in two sets of eight. The two sides can be clocked or reset independently or a single input and/or reset normals to both sides. IS switches between three modes and an encoder adjusts the offset of each side. Bonus modes add randomization options.

  • CLOCK – The clock input responds to a rising edge at about 3.3v. The inputs are normalled to each other, so connecting one clock will drive both divider sections; alternatively, each section can be clocked individually. The outputs are updated with a latency of about 70 µs.
  • RESET (INPUT AND BUTTON) – Optional inputs to the reset jack reset the state of the divider. While depressed, the reset button pauses the processing of all clocks. Once released, it resets the input on the first clock following release of the switch.
  • SHIFT (INPUT AND KNOB) – This knob / cv will “rotate” the outputs: jack 2 becomes the first output in the cycle, followed by jack 3, etc.
  • N MODE SWITCH (/2 , N, /2N+1) – The mode switch sets the divider mode. There are 3 basic modes: divide by powers of two, sequence of eight, and divide by odd numbers.
  • WACK MODE  – In WACK mode, each of the modes behaves differently: N /2 : this setting becomes probabilistic divide by two. In this mode, there is a 50% chance that a trigger will generate at each step. In this mode, clocks N change, on average, the same as in /2 , but randomly so. N: In this setting, a single random trigger is generated at each step. /2N+1: The 8 triggers outputs are activated independently at each step: for every input rising clock edge, each output has a 50% chance of going high (triggering).

 

Width: 8hp

Depth: 21mm

Power: 100mA @ +12v / 35mA @ -12v