£216.00 (£180.00 ex VAT)

6 independent VCAs with 3 different mix outputs. Each VCA is DC-coupled & switchable between a linear and exponential. Other options include: jumpered CV input normalisation for controlling multiple VCAs at once from a single CV source, plus PCB header for direct connection to the HEXa(s)r via a ribbon cable.

Out of stock

Join the waitlist to be emailed when this product becomes available

SKU: hexvca Categories: , ,


The Bubblesound HEXvca is 6 independent VCAs with 3 mix outputs. Each VCA is switchable between a linear and exponential CV response. The CV inputs are normalized using jumpers on the back, so 1 or 2 gates or Envelope Generators can control several VCAs at the same time.

With headers on the back, the HEXvca can be controlled by the Bubblesound HEXa(s)r using just a ribbon cable – eliminating the need for patch cords. There is also a 6 pin header for the audio inputs for future expansion without patch cables.

The MIX section allows the HEXvca to be a voltage controlled Mixer: channels 1-3, 4-6 and 1-6 all have dedicated summed outputs.

The VCAs are DC-coupled, so they can be used for audio or CV.

The HEXvca uses SSM2164 VVCA chips that provide plenty of headroom, very low distortion/noise and use very little power. The HEXvca is 7HP and around 30MM deep. You can never have enough VCAs but with the HEXvca it’s easier to have as many as you need.

Width: 7hp
Depth: 30mm
Power: 50mA @ +12V / 45mA @ -12V