The After Later Audio G&T will take your gates and generate triggers, and take your triggers and generate a gate.
Gate to Trigger section:
Takes a gate signal and give a trigger output on both the rise and fall of that gate. The IN LED will illuminate while the gate input is high.
Trigger to Gate section:
Takes a trig signal to start a gate signal and is normalized from the fall output in the Gate to Trig section. The gate length knob controls the gate length.
The Fall output will generate a trigger at the end of the gate. The OUT LED will illuminate while the gate output is high.
The module uses a metal shaft pot with our new 10mm aluminum knob.
Power: TBCmA @ +12v / TBCmA @ -12v