Posted on

WMD/SSF Amplitude & ADSRVCA – VCA & Envelope Response Demos [matttech]

WMDSSF Amplitude + ADSRVCA Demos

 

DEMO 01

On this demo I wanted to give a flavour of the various tones and response curves available from the WMD/SSF Amplitude VCA, whilst under control from an envelope provided by the ADSRVCA. The WMD/SSF Blender was also used in this patch.

Patch Details

  1. A chaotic rhythmic pattern was patched together, and used to clock the Turing Machine.
  2. A PDO mk.2 was sequenced by the Turing Machine, and also synced by a droning Rubicon Pulse, whose pitch was subtly modulated by a second Maths LFO.
  3. Four waves from the PDO were mixed together in the Blender, with a slow Maths LFO used to crossfade between the two 2-channel Blend mixers.
  4. The output of the Blender was fed into the Amplitude VCA
  5. The ADSRVCA was triggered – via its Gate input – by the same erratic rhythmic pattern that was clocking the Turning Machine. It was then sent to Amplitude’s VCA CV input, and also into two CV inputs on the WMD Triple Bipolar VCA (set to Phase Modulate the PDO’s channels)
  6. At 02.44 the ADSRVCA’s envelope length was changed from LO to HI, making it much shorter and spikier.
  7. During the recording various other controls were tweaked: ADSRVCA’s envelope settings; Amplitude’s Gain/ Saturation, CV Level, Offset and CV Response
  8. For the last few seconds the Loop was switched on, so that any held (Gated) notes would produce a fast, cycling AD envelope.

All in all I’d say that I didn’t hear any bleed from the Amplitude VCA, and it is capable of a very wide range of tones/ shapes – from spiky and clean, to hefty and saturated. The ADSRVCA makes a great companion for it, with some additional features demonstrated in the second demo.


 

DEMO 02

For this recording I wanted to show off the ADSRVCA in Loop mode.

Patch Details

1. This demo used the same patch as the previous one, but the ADSRVCA’s Loop mode was left engaged throughout. This effect only kicks in when a sustained gate is received (rather than a short trigger), so you will hear little bursts of the looping envelope, followed by a series of normal single hits.
2. The ADSRVCA was set to a very short envelope length, producing an almost AM (Amplitude Modulation) effect at times.
3. The Rubicon’s pitch modulation was altered, so that it swept up and down more obviously (whilst syncing the PDO used as the main sound source)
4. As with the previous demo, during the recording various controls were tweaked: ADSRVCA’s envelope settings; Amplitude’s Gain/ Saturation, CV Level, Offset and CV Response.